Skip to content
Prime LookCleaning Services

Service · Tile & Grout

Tile & Grout Cleaning in Calgary

Grout is porous, and mopping only pushes dirty water deeper into it. High-pressure extraction flushes years of build-up back out — the difference is measured in shades, not shine.

The tile is rarely the problem. It's the grout — a narrow band of porous cement between every tile that soaks up grease, mop water and foot traffic and darkens a shade at a time until the whole floor reads dingy. Because it's below the surface of the tile, a mop can't reach it and, worse, drags dirty water straight into the lines.

We clean tile and grout with a pressurised system that applies a proper dwell of cleaning solution, agitates the grout lines, then flushes everything out under high pressure and vacuums the slurry away in the same motion. What's left is the grout's actual colour, which is usually a few shades lighter than anyone expected.

It works on floors, kitchen backsplashes and tiled showers, and it pairs naturally with a carpet clean if you're already booking the soft floors upstairs.

Tile-and-grout cleaning tool and hose on a beige ceramic floor, part-way through a clean

The method

How the grout actually gets clean

We pre-treat the surface and let the solution sit long enough to break down the film in the grout — rushing this step is why a mop-and-scrub never lasts. We agitate along the lines to lift what's loosened.

Then a high-pressure spinner tool rinses and extracts at once, driving clean water into the grout and pulling the dirty water and debris straight back out before it can resettle. There's no scrubbing on hands and knees and no dirty residue left to re-attract soil, which is why the result holds instead of greying again in a fortnight.

Sealing after the clean

Grout is only clean until the next spill soaks in. Once it's been flushed and dried, a penetrating sealer fills the pores so liquids bead on top instead of wicking down, buying you far longer between deep cleans and making day-to-day mopping actually effective.

Sealing is optional and priced separately — we'll tell you whether your grout would genuinely benefit or whether it's already sealed and fine.

Natural stone needs a gentler hand

Ceramic and porcelain shrug off aggressive cleaning. Natural stone — travertine, marble, slate — does not: acidic products etch it and high pressure can pit a soft surface. If your floor is stone rather than tile, we adjust the chemistry and pressure accordingly, so tell us what you have when you book.

Questions people ask about this

Can you really restore grout to its original colour?
In most cases, yes — the darkening is trapped soil, not permanent staining, and high-pressure extraction flushes it out. Grout that was never sealed and is heavily discoloured may come up a touch uneven, and we'll set expectations before we start.
Should I have the grout sealed afterward?
It's worth it on unsealed or newly cleaned grout — a penetrating sealer keeps spills on the surface and makes the clean last much longer. It's optional and quoted separately.
Is it safe for natural stone like travertine or marble?
Yes, but we treat stone differently from ceramic or porcelain — gentler chemistry and lower pressure, since stone can etch or pit. Let us know your floor type so we bring the right approach.
How long before I can walk on the floor?
The floor is usually walkable within an hour or two. If we seal the grout, we'll give you a specific window before heavy use.

Related services

See your grout's real colour again

Send a photo of the floor or shower and we'll tell you honestly what it can come back to.

Call 587-398-2888Quote